HYLOADER LIFT TRUCK
A Manual lift & Powered option available with a 1200 mm Straddle to enable standard pallet handling. The manual version uses our proven foot operated hydraulic lift and is rated for 750 kgs at a 600 mm load centre.
The Powered lift is rated for 1000 kgs at a 600 mm load centre and uses a 12 Volt Power-pack with an integral fully automatic Battery Charger.
These units are ideal where loads handled are delicate or usage is low frequency so as to avoid using an internal combustion Fork Lift. Both units are offered with Pin type adjustable forks and have large roller bearing wheels with polyurethane tyres for ease of movement over most industrial surfaces.
These lifters can be modified to lift mandrels or fitted with a jib or other attachment.
This proven, heavy duty Multi-Purpose Lifter is an ideal alternative to the Fork Lift Truck and is capable of performing various lifting operations simply by exchanging attachments.
It is rated for 350 kgs at a 350 mm load centre and uses a single section mast for maximum visibility and durability. The self aligning carriage uses eight diagonally opposed roller bearings for optimal load stability and distribution.
Lifting and lowering are achieved through a heavy duty, gear reduction, automatic brake winch and wire rope. The MultiLift can be manufactured with almost any base configuration together with various mast height options.
Standard attachments include Fixed Forks, Adjustable Forks, Slip-On-Platform or a three position Jib.
|Please note: Prices do not include GST. Contact us for delivery costs.|
|ML||Multi Lifter – base unit (no attachments)||$1,700.00|
|CB / ML||Counterbalanced Multi Lifter (cost of C/ weight to be added)||$2,550.00|
|Attachments for ML Multi Lifter|
|CJ||Crane Jib with D shackle & Hook||$400.00|
|FF||Fixed Position Forks||$420.00|
|SOP||Slip on Platform (must be used in conjunction with forks)||$380.00|
|FSW||Front Swivel Wheels||$320.00|
|GAL||Hot dipped galvanised base, carriage & forks||$750.00|
PLATFORM LIFT TRUCK
This will safely lift & transport 300 kg loads on a generous 850 mm long x 550 mm wide, 3 mm electroplated platform. The platform uses a foot operated hydraulic lift to take the platform from 150 mm to 1,400 mm lift height.
It uses 125 mm diameter roller bearing wheels to negotiate poor or swarf lined factory surfaces and the two rear castors are each fitted with a brake for safety whilst lifting and lowering.
This is an ideal work Platform or utility lifter where loads are 300 kgs or less.
The MiniLift stands out as a heavy duty lifter without compromise. It is rated to safely handle 200 kgs at a 350 mm load centre and uses a 24 Volt battery circuit for lifting and lowering. It is designed for Food, Beverage, Pharmaceutical and Factory applications.
There is no metal to metal contact at the mast/carriage assembly which eliminates any foreign particles migrating into your process. The MiniLift uses our extruded aluminium mast with an off-set nylon bearing system and a Poly Cog Belt with integrated stainless steel wires imbedded in the rear of the belt for maximum security and longevity.
Drive to the belt is via a direct flange mounted electric motor to a worm type gearbox and a cog pulley on the output shaft. It features an Electronic Overload protection to preclude operators lifting above the rated capacity.
Lifting and lowering limits are set via IP 67 Limit Switches. All other electrical hardware is enclosed in an IP 65 Enclosure. The MiniLift also offers three Ramp Speed variants to tailor lift speed acceleration in critical applications or where loads being handled are very sensitive.